移动端

您现在的位置:兴旺宝>自动化网>技术列表>研华ADAM-6256 远程I/O模块 以太网I/O模块 晶创越世

企业推荐

更多

研华ADAM-6256 远程I/O模块 以太网I/O模块 晶创越世

2026年05月04日 07:15:47 人气: 97 来源: 晶创越世科技(北京)有限公司

产品简介:

支持Modbus TCP的16路隔离数字量输出模块

带自动旁路保护的菊花链

通过智能移动客户端/平板电脑实现远程监控与控制

多个模块成组配置功能

DI/O LED指示灯

Modbus地址可由用户自定义

支持GCL与点对点功能的智能控制

支持多种协议:Modbus TCP, TCP/IP, UDP, HTTP, DHCP

支持Web语言:HTML 5, Java Script, XML

系统配置备份

用户登录控制

产品参数:

General
Real-time Clock

Yes

Connector

Plug-in 5P/15P screw terminal blocks

Dimensions

110 x 60 x 27 mm

Ethernet

2-port 10/100 Base-TX (for Daisy Chain)

LED Indicators

16 DO

Power Consumption

3.2 W @ 24 VDC

Power Input

10 - 30 VDC (24 VDC standard)

Protection

Built-in TVS/ESD protection Power Reversal protection Over Voltage protection: +/- 35VDC Isolation protection: 2500 VDC

Protocol

Modbus/TCP, TCP/IP, UDP, HTTP, DHCP, SNMP, MQTT

Watchdog Timer

System (1.6 seconds), Communication (Programmable)

Humidity (Operating)

20 ~ 95% RH (non-condensing)

Operating Temperature

-40 ~ 70°C (-40~158°F)

Storage Humidity

0 ~ 95% RH (non-condensing)

?

Digital Input
Input Voltage

Dry contact: Logic level 0: close to GND Logic level 1: open Wet contact: Logic level 0: 0~3 VDC Logic level 1: 10~30 VDC

Counter Input

3kHz (32 bit + 1 bit overflow)

Dry Contact

Logic 0: Open Logic 1: Closed to DGND

Frequency Input

0.1 ~ 3kHz

Input Impedance

5.2 kW (Wet Contact)

Keep/Discard Counter Value when power off

-

Supports Inverted DI Status

-

Transition Time

0.2 ms

Wet Contact

Logic 0: 0 ~ 3 VDC or 0 ~ -3 VDC Logic 1: 10 ~ 30 VDC or -10 ~ -30 VDC (Dry/Wet Contact decided by Switch)

Relay Output
Channels

16 (Sink Type)

Delay Output

High-to-Low and Low-to-High

Normal Output Current

100 mA (per channel)

Output Voltage Range

10 ~ 30 VDC

Pulse Output

Up to 5kHz

 

全年征稿/资讯合作 qq:1097660699@qq.com
版权与免责声明
1、凡本网注明"来源:兴旺宝"的所有作品,版权均属于兴旺宝,转载请必须注明兴旺宝,https://www.xwboo.com。违反者本网将追究相关法律责任。
2、企业发布的公司新闻、技术文章、资料下载等内容,如涉及侵权、违规遭投诉的,一律由发布企业自行承担责任,本网有权删除内容并追溯责任。
3、本网转载并注明自其它来源的作品,目的在于传递更多信息,并不代表本网赞同其观点或证实其内容的真实性,不承担此类作品侵权行为的直接责任及连带责任。其他媒体、网站或个人从本网转载时,必须保留本网注明的作品来源,并自负版权等法律责任。
4、如涉及作品内容、版权等问题,请在作品发表之日起一周内与本网联系,否则视为放弃相关权利。